My Account
My Lists
My Orders
My Invoices
Track My Order
360 degree,
16m detection
range
Easy to setup
The setup switches are conveniently located on the side of the sensor, under a simple to remove cover, making them easy to see and adjust when you are up on a ladder
Wall or
under-eave
mounting
The sensor head swivels, making it suitable for mounting on both vertical and horizontal surfaces
Two-part install
First fix – wire and attached the sensor base Second fix - push the sensor head onto the base, then attach with two screws
- 3-wire PIR motion sensor
- IP55 weather resistant design
- 360º detection angle with shields to restrict detection angle
- Up to 16 metre radius detection distance at a height of 2.5m
- For installation on vertical and horizontal surfaces
- Easy installation: mount the base, and simply plug in sensor body
- Rated Switching Capacity: MAXIMUM - Inductive/Fluorescent/LED: 400W, Resistive/Incandescent: 2300W
- A contactor is required for loads exceeding the maximum load rating, or where multiple sensor outputs are connected in parallel.
- Time Delay 5 seconds to 30 minutes
- 3 to 2000 Lux switching adjustment
- Manual Override: Yes - 8 hours on by turning power switch OFF-ON twice (will revert to AUTO at dawn)
- Optional corner mounting bracket
- Operating Temperature: -20 to +40ºC
- Standby Power Consumption: 0.5W
- 7-year warranty
